Cylinder Testing

Your cylinder may be looked after and look fine on the out side, but sometimes unseen damage and contaminants can build up inside. Regular servicing will ensure your cylinders are safe and it is not only the cylinder that gets a service.

Sometimes the cylinder valves can collect debris over time, this can, in turn, damage your gun if used for air rifles, or your regulators if used for diving. We check the valves as well as the cylinder during a service.

It is a requirement to get your cylinder regularly checked and tested before having an air fill. To see how often you should get your cylinder tested see below.

Need an air fill? We are able to fill cylinders with Air, Nitrox and Trimix Fills up to 300Bar.

Cylinder testing

Cylinders Test Requirements

DIVING CYLINDER

Diving cylinders must have the following:

  • Visual Inspection - every 2.5 years
  • Hydrostatic Inspection - every 5 years
  • O2 Clean – Every 15 Months - if you intend to use enriched air in your cylinder it is recommended to have your cylinder O2 cleaned.

AIR GUN CYLINDER

  • Hydrostatic Inspection - every 5 years

INDUSTRIAL CYLINDER

  • Hydrostatic Inspection - every 5 years

PAINTBALL CYLINDER

  • Hydrostatic Inspection - every 5 years